FAG Tapered roller bearings - 329/28
Our highly-skilled and factory-trained service experts have the resources to help you with all JiNan Hope Hydraulic Co., Itd your FAG Tapered roller bearings - 329/28 needs - N/A Minimum Buy Quantity including routine maintenance, major repairs, warranty service, and Mounted Units & Inserts Category FAG Spindle Bearings equipment inspections.
Product Details
| Category | Mounted Units & Inserts |
| Inventory | 0.0 |
| Minimum Buy Quantity | N/A |
| Weight | 3.894 |
| Product Group | M06288 |
| bore diameter: | 40 mm |
| expansion type: | Non-Expansion Bearing (Fixed) |
| overall length: | 205 mm |
| finish/coating: | Uncoated |
| overall height: | 114 mm |
| radial dynamic load capacity: | 96.5 N |
| mounting: | Two-Bolt Base |
| radial static load capacity: | 90 N |
| bearing type: | Spherical Roller |
| maximum rpm: | 5900 RPM |
| bore type: | Round |
| lubrication type: | Lubrication Fitting |
| housing construction: | Split Pillow Block |
| operating temperature range: | +55 to +120 °F |
| base to bore centerline: | 60 mm |
| series: | SYNT |
| bolt center-to-center length: | 170 mm |
| replacement bearing: | 22208E |
| base width: | 60 mm |
| da | 40 mm |
| A | 60 mm |
| B | 65 mm |
| H | 114 mm |
| H1 | 60 mm |
| H2 | 25 mm |
| J | 170 mm |
| L | 205 mm |
| N | 20 mm |
| N1 | 15 mm |
| S | 2.5 mm |
| A3 | 51 mm |
| A5 | 23.5 mm |
| ba min. | 34 mm |
| ba max. | 43 mm |
| J6 | 185 mm |
| J7 | 21 mm |
| N4 max. | 6 mm |
| Basic dynamic load rating C | 96.5 kN |
| Basic static load rating C0 | 90 kN |
| Fatigue load limit Pu | 9.8 kN |
| Limiting speed | 5900 r/min |
| Calculation factor e | 0.28 |
| Calculation factor Y1 | 2.4 |
| Calculation factor Y2 | 3.6 |
| Bearing mean diameter dm | 60 mm |
| P0° | 160 kN |
| P55° | 265 kN |
| P90° | 160 kN |
| P120° | 100 kN |
| P150° | 90 kN |
| P180° | 110 kN |
| Pa | 15 kN |
| Mass bearing unit | 3.8 kg |
| Attachment bolt diameter G | 12 mm |
| Tightening torque for attachment bolts | 80 N·m |
| Grub screws | 3 x M 6 |
| Tightening torque for grub screws | 8 N·m |
| Grease quantity for relubrication | 4 g |
