FAG BEARING NJ2315-E-M1A-C3 Roller Bearings
Can't find what you're looking 24x9x7 for FAG BEARING NJ2315-E-M1A-C3 Roller Bearings ? Our expert INA FAG TIMKEN Tapered Roller Thrust Bearings Representatives be in contact JiNan Hope Hydraulic Co., Itd with you shortly!
Product Details
| Bearing number | 709 ACE/P4AH |
| Size (mm) | 24x9x7 |
| Bore Diameter (mm) | 24 |
| Outer Diameter (mm) | 9 |
| Width (mm) | 7 |
| d | 9 mm |
| D | 24 mm |
| B | 7 mm |
| d1 | 13.6 mm |
| d2 | 13 mm |
| D1 | 19.4 mm |
| K | 0.5 mm |
| C1 | 4.25 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.15 mm |
| a | 7.4 mm |
| da - min. | 11 mm |
| db - min. | 11 mm |
| Da - max. | 22 mm |
| Db - max. | 22.6 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.15 mm |
| dn | 14.8 mm |
| Basic dynamic load rating - C | 2.5 kN |
| Basic static load rating - C0 | 0.9 kN |
| Fatigue load limit - Pu | 0.038 kN |
| Limiting speed for grease lubrication | 90000 r/min |
| Limiting speed for oil lubrication | 137000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 9 |
| Gref | 0.19 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 23 N |
| Preload class B - GB | 65 N |
| Preload class C - GC | 130 N |
| Calculation factor - f | 1.02 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1 |
| Preload class A | 26 N/micron |
| Preload class B | 38 N/micron |
| Preload class C | 50 N/micron |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 11 mm |
| db min. | 11 mm |
| Da max. | 22 mm |
| Db max. | 22.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| Basic dynamic load rating C | 2.51 kN |
| Basic static load rating C0 | 0.9 kN |
| Fatigue load limit Pu | 0.038 kN |
| Attainable speed for grease lubrication | 90000 r/min |
| Attainable speed for oil-air lubrication | 137000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 9 |
| Reference grease quantity Gref | 0.19 cm³ |
| Preload class A GA | 23 N |
| Static axial stiffness, preload class A | 26 N/µm |
| Preload class B GB | 65 N |
| Static axial stiffness, preload class B | 38 N/µm |
| Preload class C GC | 130 N |
| Static axial stiffness, preload class C | 50 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.014 kg |
