NTN LM451345/LM45131#01 Roller s
With over 10170 full-service stores, our NTN LM451345/LM45131#01 Roller s inventory is Angular Contact Ball Bearing Category extensive and our parts are priced right. within 24 hours. This helps you maximize your JiNan Hope Hydraulic Co., Itd productivity by saving time and your hard-earned dollars.
Product Details
| Category | Angular Contact Ball Bearing |
| Inventory | 1.0 |
| Minimum Buy Quantity | N/A |
| Weight | 3.98 |
| Product Group | B00308 |
| Enclosure | Open |
| Flush Ground | No |
| Rolling Element | Ball Bearing |
| Number of Rows of Balls | Single Row |
| Precision Class | ABEC 3 | ISO P6 |
| Maximum Capacity / Filling Slot | No |
| Snap Ring | No |
| Cage Material | Brass |
| Contact Angle | 35 Degree | 4 Point |
| Internal Clearance | C0-Medium |
| Number of Bearings | 1 (Single) |
| Inch - Metric | Metric |
| Long Description | 100MM Bore; 180MM Outside Diameter; 34MM Width; Open; No Flush Ground; Ball Bearing; Single Row of Balls; ABEC 3 | ISO P6; No Filling Slot; No Snap Ring |
| Other Features | Split Inner Race |
| UNSPSC | 31171531 |
| Harmonized Tariff Code | 8482.10.50.28 |
| Noun | Bearing |
| Keyword String | Angular Contact |
| Manufacturer Item Number | QJ 220 N2MA |
| Weight / LBS | 8.769 |
| d | 100 mm |
| B | 34 mm |
| D | 180 mm |
| inside diameter: | 100 mm |
| precision rating: | ABEC 1 (ISO Class Normal) |
| outside diameter: | 180 mm |
| cage material: | Brass |
| overall width: | 34 mm |
| maximum rpm: | 6300 RPM |
| internal clearance: | C0 |
| finish/coating: | Uncoated |
| closure type: | Open |
| outer ring width: | 34 mm |
| radial dynamic load capacity: | 236 kN |
| fillet radius: | 2 mm |
| radial static load capacity: | 265 kN |
| series: | QJ |
| d1 ≈ | 127 mm |
| D1 ≈ | 153 mm |
| a | 98 mm |
| h | 10.1 mm |
| b | 8.5 mm |
| r0 | 2 mm |
| r1,2 min. | 2.1 mm |
| da min. | 112 mm |
| Da max. | 168 mm |
| ra max. | 2 mm |
| Basic dynamic load rating C | 236 kN |
| Basic static load rating C0 | 265 kN |
| Fatigue load limit Pu | 9.5 kN |
| Limiting speed | 6300 r/min |
| Calculation factor A | 0.176 |
| Calculation factor e | 0.95 |
| Calculation factor X | 0.6 |
| Calculation factor Y0 | 0.58 |
| Calculation factor Y1 | 0.66 |
| Calculation factor Y2 | 1.07 |
| Mass bearing | 4.05 kg |
