FAG Needle roller and cage assemblies - K47X52X17
FAG Needle roller and cage assemblies - K47X52X17 Manufacturers , Online Wholesale Suppliers JiNan Hope Hydraulic Co., Itd 160 mm da ! 153.988 mm dc
Product Details
| da | 160 mm |
| db | 177.8 mm |
| dc | 153.988 mm |
| Da | 289.999 mm |
| Ca | 89.789 mm |
| A1 | 158.75 mm |
| A2 | 288.925 mm |
| S | 4.763 mm |
| ba | 70.644 mm |
| H | 338.137 mm |
| H1 | 169.875 mm |
| H2 | 66.675 mm |
| L | 558.8 mm |
| R1 | 104.775 mm |
| R2 | 33.337 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 52.388 mm |
| Housing | SSAFS 232 |
| Stabilizing ring | SR-32-0 |
| Taconite seal (db shaft position) | TER 156 |
| Taconite seal (dc shaft position) | TER 142 |
| End plug (suffix Y) | EPR 18 |
| Max. speed for Taconite seal | 440 r/min |
| P60° | 345 kN |
| P90° | 207 kN |
| P120° | 133 kN |
| P150° | 120 kN |
| P180° | 145 kN |
| Pa | 93.9 kN |
| Mass pillow block | 125 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Initial grease fill | 793.8 g |