FAG Drawn cup needle roller bearings with open ends - SCE2016
What is the best place to buy 147.803 mm Ca FAG Drawn cup needle roller bearings with open ends - SCE2016 online? JiNan Hope Hydraulic Co., Itd 180.975 mm da FAG Spindle Bearings Manufacturing Service .
Product Details
| da | 180.975 mm |
| Da | 419.999 mm |
| Ca | 147.803 mm |
| A1 | 228.6 mm |
| A2 | 317.5 mm |
| S | 4.763 mm |
| ba | 103.188 mm |
| H | 495.3 mm |
| H1 | 250.825 mm |
| H2 | 101.6 mm |
| J min. | 666.75 mm |
| J max. | 749.3 mm |
| J1 | 139.7 mm |
| L | 869.95 mm |
| N1 | 41.275 mm |
| R1 | 163.512 mm |
| R2 | 50.8 mm |
| RG | 1 NPT |
| PG | 1/4 NPT |
| h | 87.313 mm |
| Housing | SAFS 640 |
| Stabilizing ring | SR-0-40 |
| Labyrinth ring | 2 x LOR 664 |
| End plug (suffix Y) | EPR 21 |
| Bearing limiting speed | 1500 r/min |
| P60° | 669 kN |
| P90° | 400 kN |
| P120° | 249 kN |
| P150° | 222 kN |
| P180° | 267 kN |
| Pa | 82.7 kN |
| Mass pillow block | 431 kg |
| Cap bolt | 4 x 1 1/2-6 UNC |
| Cap bolt recommended tightening torque | 4284.4 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 1/2-13 UNC |
| Appropriate attachment bolt size G | 1.5 in |
| Initial grease fill | 3515.4 g |