replacement shaft seal for eaton series 3 pump or motor
With over Flange Block Category 10170 full-service stores, our replacement shaft seal for eaton series 3 pump or motor inventory is extensive and our parts are priced right. within 24 hours. This helps you JiNan Hope Hydraulic Co., Itd maximize your productivity by saving time and your hard-earned dollars.
Product Details
| Category | Flange Block |
| Inventory | 21.0 |
| Minimum Buy Quantity | N/A |
| Weight | 3.94 lb |
| Product Group | M06110 |
| Number of Mounting Holes | 4 |
| Mounting Method | Eccentric Collar |
| Housing Style | 4 Bolt Square Flange Block |
| Rolling Element | Ball Bearing |
| Housing Material | Cast Iron |
| Expansion / Non-expansion | Non-expansion |
| Mounting Bolts | 33/64 Inch |
| Relubricatable | Yes |
| Insert Part Number | G1107KRRB |
| Seals | Double Land Riding Rubber Contact |
| Housing Configuration | 1 Piece Solid |
| Pilot Configuration | No Pilot |
| Inch - Metric | Inch |
| Long Description | 4 Bolt Square Flange Block; 1-7/16" Bore; 5.1" Bolt Circle; 3-5/8" Bolt Spacing; 1 Piece Solid; Eccentric Collar Mount; Cast Iron; Ball Bearing; 1-31/64" Length Thru Bore; Relubric |
| Other Features | Single Row | Normal Duty | With Set Screw |
| UNSPSC | 31171501 |
| Harmonized Tariff Code | 8483.20.40.40 |
| Noun | Bearing |
| Keyword String | Flanged |
| Manufacturer Item Number | RCJ 1 7/16 |
| Weight / LBS | 3.94 |
| Nominal Bolt Circle Diameter Round | 5.1 Inch | 130 Millimeter |
| d | 1.438 Inch | 36.525 Millimeter |
| Cartridge Pilot Diameter | 0 Inch | 0 Millimeter |
| Bolt Spacing | 3.625 Inch | 92.08 Millimeter |
| Cartridge Pilot Depth | 0 Inch | 0 Millimeter |
| D | 1.484 Inch | 37.7 Millimeter |
| Shaft Size d | 1 7/16 in |
| Bearing Number | G1107KRRB |
| Dimension D | 3.500 in |
| Dimension E | 2.106 in |
| Inside Ring Outside Diameter | 2.110 in |
| Series | Industrial |
| Seal Type | Shroud Seal |
| Total Length L | 117.5 mm |
| Housing Width A | 1.252 in |
| Bolt Hole Spacing J | 92.1 mm |
| Bolt Hole Size N | 12 mm |
| Flange Thickness A1 | 13.5 mm |
| Center of Bearing from Housing End A2 | 21 mm |
| Inside Ring Width B | =Bearings1_Inside Ring Width= mm |
| Bolt Size | M12 |
| Center of Bearing from Bearing End S | 21 mm |
| Static Load Rating | 3440 lbf |
| Dynamic Load Rating | 6400 lbf |
Recommended Products
-
SAUER DANFOSS AXIAL PISTON HYDRAULIC MOTOR 1.72 SHAFT 90M100NC0N8N0F1 -
SAUER DANFOSS AXIAL PISTON HYDRAULIC MOTOR 1.74 SHAFT 90M100NC0N8N0F1 -
YUKEN Series Industrial Single Vane Pumps - PVR50 - 51 -
YUKEN Series Industrial Single Vane Pumps - PVR1T-L-17-FRA -
YUKEN Series Industrial Single Vane Pumps - PVR50 - 13 -
YUKEN Series Industrial Single Vane Pumps -L- PVR50 - 26