CAT320 CYLINDER BLOCK AND REAR PLATE
Various Hitachi Hydraulic Pump types 70x150x35 and JiNan Hope Hydraulic Co., Itd sizes to accommodate your CAT320 CYLINDER BLOCK AND REAR PLATE requirements.
Product Details
| Bearing number | 7314B |
| Size (mm) | 70x150x35 |
| Bore Diameter (mm) | 70 |
| Outer Diameter (mm) | 150 |
| Width (mm) | 35 |
| d | 70 mm |
| D | 150 mm |
| B | 35 mm |
| C | 35 mm |
| Angle (α) | 40 ° |
| a | 63,5 mm |
| r min. | 2,1 mm |
| r1 min. | 1,1 mm |
| da min. | 82 mm |
| db min | 77 mm |
| ra max. | 2 mm |
| Weight | 2,61 Kg |
| Basic dynamic load rating (C) | 114 kN |
| Basic static load rating (C0) | 86 kN |
| (Grease) Lubrication Speed | 4 400 r/min |
| Contact angle α | 40 ° |
| rs min | 2.1 mm |
| r1s min | 1.1 mm |
| Mass | 2.61 kg |
| Dynamic load, C | 114 kN |
| Static load, C0 | 86 kN |
| Fatigue limit load, Cu | 3.75 kN |
| Nlim (oil) | 5,800 rpm |
| Nlim (grease) | 4,400 rpm |
| Min operating temperature, Tmin | -40 °C |
| Max operating temperature, Tmax | 120 °C |
| da min | 82 mm |
| Da max | 138 mm |
| Db max | 143 mm |
| r1a max | 1 mm |
| ra max | 2 mm |
| Category | Angular Contact Ball Bearing |
| Inventory | 0.0 |
| Minimum Buy Quantity | N/A |
| Weight / Kilogram | 2.612 |
| Product Group | B00308 |
| Enclosure | Open |
| Flush Ground | No |
| Rolling Element | Ball Bearing |
| Number of Rows of Balls | Single Row |
| Precision Class | ABEC 1 | ISO P0 |
| Maximum Capacity / Filling Slot | No |
| Snap Ring | No |
| Cage Material | Steel |
| Contact Angle | 40 Degree |
| Internal Clearance | C0-Medium |
| Number of Bearings | 1 (Single) |
| Inch - Metric | Metric |
| Long Description | 70MM Bore; 150MM Outside Diameter; 35MM Width; Open; No Flush Ground; Ball Bearing; Single Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; C0-Medium; Steel Cage; 40 Degree; 1 (Single) |
| UNSPSC | 31171531 |
| Harmonized Tariff Code | 8482.10.50.28 |
| Noun | Bearing |
| Keyword String | Angular Contact |
| Width | 1.378 Inch | 35 Millimeter |
| Outside Diameter | 5.906 Inch | 150 Millimeter |
| Bore | 2.756 Inch | 70 Millimeter |
Recommended Products
-
SAUER DANFOSS AXIAL PISTON HYDRAULIC MOTOR 1.72 SHAFT 90M100NC0N8N0F1 -
SAUER DANFOSS AXIAL PISTON HYDRAULIC MOTOR 1.74 SHAFT 90M100NC0N8N0F1 -
YUKEN Series Industrial Single Vane Pumps - PVR50 - 51 -
YUKEN Series Industrial Single Vane Pumps - PVR1T-L-17-FRA -
YUKEN Series Industrial Single Vane Pumps - PVR50 - 13 -
YUKEN Series Industrial Single Vane Pumps -L- PVR50 - 26