OTC PE-183 HYDRAULIC PUMP USED
YOU’LL 35x80x21 FIND AN 35 Bore Diameter (mm) EXTENSIVE SELECTION OF OTC PE-183 HYDRAULIC PUMP USED FOR SALE. JiNan Hope Hydraulic Co., Itd
Product Details
| Bearing number | 7307BDT |
| Size (mm) | 35x80x21 |
| Bore Diameter (mm) | 35 |
| Outer Diameter (mm) | 80 |
| Width (mm) | 21 |
| d | 35 mm |
| D | 80 mm |
| B | 21 mm |
| C | 21 mm |
| Angle (α) | 40 ° |
| a | 13.7 mm |
| r min. | 1.5 mm |
| r1 min. | 1 mm |
| 2B | 42 mm |
| da min. | 40 mm |
| Da max. | 74.6 mm |
| ra max. | 1 mm |
| Weight | 0.475 Kg |
| Basic dynamic load rating (C) | 61,5 kN |
| Basic static load rating (C0) | 49,5 kN |
| (Grease) Lubrication Speed | 5500 r/min |
| Bore Type | Cylindrical Bore |
| Enclosure | Open |
| Configuration | Duplex |
| Bore Size | 35 mm |
| Outside Diameter | 80 mm |
| Width | 21 mm |
| Fillet Radius/Chamfer | 1.5 mm |
| r1 | 1 mm |
| Dynamic Load Rating | 61,500 N |
| Static Load Rating | 49,500 N |
| Limiting Speed - Grease | 5,500 rpm |
| Limiting Speed - Oil | 7,500 rpm |
| da1 (min) | 44 mm |
| da2 (min) | 40 mm |
| Da1 (max) | 71 mm |
| Da2 (max) | 74.6 mm |
| ra (max) | 1.5 mm |
| ra1 (max) | 1 mm |
Recommended Products
-
SAUER DANFOSS AXIAL PISTON HYDRAULIC MOTOR 1.72 SHAFT 90M100NC0N8N0F1 -
SAUER DANFOSS AXIAL PISTON HYDRAULIC MOTOR 1.74 SHAFT 90M100NC0N8N0F1 -
YUKEN Series Industrial Single Vane Pumps - PVR50 - 51 -
YUKEN Series Industrial Single Vane Pumps - PVR1T-L-17-FRA -
YUKEN Series Industrial Single Vane Pumps - PVR50 - 13 -
YUKEN Series Industrial Single Vane Pumps -L- PVR50 - 26